The AF gas filter is primarily used to remove impurities from the gas, enhancing its efficiency and ensuring more complete combustion. It also helps reduce gas consumption while protecting the normal operation of downstream gas pipeline equipment. The housing is made of aluminum alloy, and the filter core is composed of synthetic fibers. The flanged connection type filter core is reinforced with steel mesh. There is a pressure test point at the inlet of the flanged connection type filter. The filter can be installed vertically or horizontally, making it easy to remove the valve cover for cleaning. The filter core should be replaced annually, or as soon as the pressure difference before and after the filter exceeds 10 mbar.
Product Parameter | |
Shell: | Aluminum alloy |
Filter element: | Synthetic fiber, flange connected filter element is reinforced with steel wire mesh |
Standard: | In line with the EU BS En126 standard |
Maximum inlet pressure: | 4Bar |
Filtration precision: | Less than 50µm |
Medium: | City gas, natural gas, propane, non-corrosive gas, etc. |
Gas Solenoid valve
Wind/Air Actuator valve
Manual gas and wind valve
Gas air propotional Valve
Gas regulator pressure valve
Flame detection and burner ignition controllers
Blowers
Accessories